Front derailleur hanger for U.P./U.P.P.E.R. is bolt-on removable style. The front derailleur hanger for the MIN.D. is riveted on.

With a go-anywhere, do-anything bike, an accident is sometimes unavoidable. To repair scratches and chips, use our touch-up paint. Each order contains one colour, select below.

The De-fender fender consists of custom SKS blades & stays combined with custom superlight Carbon-Ti mini-axles to attach them. This complete set contains both.

The De-fender is compatible only with the OPEN WI.DE. model. The De-fender is size dependent so please order the correct size to match your frame.

Please allow for 2 weeks of shipping time to keep costs reasonable. Please read the notes and watch the video here before purchasing.

CAREFUL: THIS IS NOT A COMPLETE SET. This item consists only of two sets of replacement blades & stays. Only order these if you already own the custom Carbon-Ti mini-axles to attached the stays to the frame.

The De-fender is compatible only with the OPEN WI.DE. model. The De-fender blades are size dependent so please order the correct size to match your frame.

Please allow for 2 weeks of shipping time to keep costs reasonable. Please read the notes and watch the video here before purchasing.

CAREFUL: THIS IS NOT A COMPLETE SET. This item consists only of the custom superlight Carbon-Ti mini-axles to attached the De-fender stays to the frame.

The De-fender is compatible only with the OPEN WI.DE. model.

Please allow for 2 weeks of shipping time to keep costs reasonable. Please read the notes and watch the video here before purchasing.

This item includes the top clamp, 3x internal top clamp shim, 7x spacers and 4x top clamp screws. Adjustment 0-35mm adjustment.

See the instructions for more information. Note this item does NOT include the Ritchey rail clamp. (Ritchey rail clamps available from Ritchey - ritcheylogic.com)

This set includes 15mm of spacers (1x8mm, 3x2mm, 1x1mm) to go inside the seatmast top clamp. See the instructions for more information.

This set includes the parts to secure the Di2 battery inside the MIN.D. seatmast.

Set of all 3 MultiStops for the U.P., U.P.P.E.R., WI.DE., MIN.D. and ONE+ frames. Versions for 2x, 1x and Di2 included.

For those wishing to run 1x and a dropper post internally, we recommend using the 2x MultiStop if you drill out the front derailleur entry channel for the dropper post.

NOTE: For the U.P., U.P.P.E.R., WI.DE., MIN.D. and ONE+, every frame size uses the same MultiStop so they are not frame size-dependent.

Set of eTAP specific MultiStop headtube cable entry (one hole for brake cable only), rubber bottom bracket plug (can be used for Shimano DI2 also) and chain stay cable exit plug.

Cable exit guide for any mechanical rear derailleur cable (Shimano or SRAM) exiting from the dropout of the U.P. and U.P.P.E.R. or from the chainstay of the ONE+ frame.

Chainstay cable exit guide for U.P., U.P.P.E.R., WI.DE. and ONE+ to be used with Shimano DI2 cable.

To reduce friction and prevent any housing fraying, use these liners in your MultiStop headtube insert as well as your BB guide.

NOTE: This item is sold individually, so please order 4 if you need a full set for a double chainring set-up and 2 for a single chainring set-up.

See this video for assembly instructions.

Prevent your brake hose and shifter housing or wires (if you use any) from rattling with this foam liner. 1.2m is enough for one bike. Instructions in the Tech info videos.

Seattube collar suitable for U.P./U.P.P.E.R./WI.DE/ONE+ models, includes bolt and 4-circle logo (with one of the circles doubling as the bolt thread).

Steel chain stay protector for WI.DE.

Steel chainstay protector for the previous generation (O-1.0 and O-1.1) hardtail frames.

MultiStop headtube cable entry for the previous generation hardtail (O-1.0 and O-1.1). Choose the appropriate version for your frame size (S/M frames use different MultiStops than L/XL size) and type: single chainring (1x) mechanical shifting or electronic (Di2) shifting.

If you wish to run a single chainring and dropper post internally, we recommend the 2x MultiStop (see complete 2x shift guide set - for O-1.0/O-1.1) and drill out the front derailleur entry channel for the dropper post.

Complete set of 2x MultiStop headtube cable entry, chainstay cable exit & BB guide for the previous generation hardtail (O-1.0 and O-1.1). Choose the appropriate version for your frame size (S/M frames use different MultiStops than L/XL size).

If you wish to run a single chainring and dropper post internally, we recommend this 2x MultiStop and drill out the front derailleur entry channel for the dropper post.

Headset for the previous generation (O-1.0 and O-1.1) hardtail frames.

This is a custom headset for the MIN.D., designed to work with the fork’s oversized steerer inside our traditional size headtube.